Silnik MAN V12-2000 do MAN D2862 LE496
Interesuje Cię ogłoszenie?
1/4
1 €
Cena netto
≈ 4,31 zł
1,24 €
Cena brutto
Typ:
silnik
Numer katalogowy:
D2862LE496
Numer katalogowy oryginału:
V12-2000
Typ części zamiennej:
oryginalna część zamienna
Rocznik:
2023-12
Lokalizacja:
Austria Hörsching7279 km od Ciebie
Austria Hörsching7279 km od Ciebie
Data zamieszczenia:
23 wrz 2024
Numer w ofercie dealera:
D2862LE496
Opis
Moc silnika:
2 000 KM
Liczba cylindrów:
12
Typ silnika:
kształtu V
Turbo:
Paliwo:
diesel
Euro:
6
Chłodnica:
Pojemność silnika:
24 000 cm³
Marka skrzyni biegów:
ZF
Silnik
Moc:
2000 KM (1470 kW)
Turbo:
Chłodnica:
Euro:
Euro 6
Skrzynia biegów
Marka:
ZF
Stan
Stan:
nowy
Okres gwarancji::
od 1 roku
Ważne
Oferta ma charakter informacyjny. Oferta handlowa dostępna wyłącznie po bezpośrednim skontaktowaniu się z ogłoszeniodawcą.
Jak bezpiecznie dokonać zakupu
Kontakt do sprzedającego
R.Schwarzmuller
Języki:
angielski
+358 50 53...
Pokaż
+358 50 5345498
+358 9 231...
Pokaż
+358 9 23165797
Adres
Austria, Viena, 4063, Hörsching, Flughafenstrasse 3
Lokalny czas dealera:
18:32 (CEST)
Kontakt do sprzedającego
ETC EUROPE TRUCK FINLAND OY
Austria
od 9 lat na Machineryline
+358 50 53...
Pokaż
+358 50 5345498
+358 9 231...
Pokaż
+358 9 23165797
Handlujesz sprzętem?
Możesz robić to z nami!
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG
1471 kW (2000HP) at 2300 rpm
Injection system- Common Rail
Engine control unit EDC17, Max. torque at rated speed (Nm/rpm) 6500/1200-2100
EPA Tier 3 recreational, IMO Tier II, RCD 2013/53/EC, 97/68/EC
including throttle and instruments for one station
Technical specification:
IV.2 Engine with:
individual cylinder heads
cylinder liners replaceable
intercooler
cooling water pump
cooling water thermostat gear pump for force-feed lubrification
vibration damper
flywheel housing SAE 1
0080 Engine data plate
2500 Dry air cleaner
0004 Exhaust turbocharger, water cooled
0056 Exhaust manifold, water cooled
0295 Exhaust expansion joint
0300-1 Exhaust gas outlet horizontal (+/- 10°)
9223 Engine room equipment consisting of: E-Box (alarm system) with display, local control and em.stop
0156 Engine bracket at front end and rear end
0124 Resilient mounting, adjustable in height, for engines with flanged on gearbox
1030-1 Injection system CR for variable speed, EDC left side (right side)
1100 Injection piping standard
1208 Fuel prefilter with water separator, flame proof detached, hose line 1,5m
1255 Double Fuel filter, left side
1505-6 Electric 24V, 5,4Kw, 2 pole insulated on the left side (right side)
0141 Alternator 28 V, 120 A, class version
0040 Lube oil filter and oil cooler, combined, standard
2140-1 Lube oil sum, standard, dipstick unmarked, attached on the left side (right side)
2305-6 Mounting parts for oil drain, attached on the left side (right side)
2302 Electrical oil drain pump 24V
3902 Plate heat exchanger with surge tank up to 32°C sea water temperature attached
0256 Sea water pump
4507 Flywheel 2,08 kgm2
0320 V-Belt guard, black, attached
4850 Engine fitted PTO for attachment of a hydro-pump
9006 Service documentation on CD
9901 Technical information ENG